Oceanic Dive Computer Pro Plus 2 Manual de usuario Pagina 37

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 100
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 36
37
TO SET - END PRESSURE ALARM
(while in the Surface Mode)
Factory set for 00 PSI/BAR (disabled), the End Pressure
Alarm can be set to values between 300 and 1500 PSI (20
to 104 BAR) in increments of 100 PSI (7 BAR).
• Press Both buttons simultaneously, release when SET: 2
appears (4 seconds).
• Press and release the Left (Advance) button, the Units
screen appears with the set point flashing.
• Press the Left (Advance) button 11 more times.
• The graphic End and Alarm (speaker) icon appear with
the End Pressure Alarm value flashing (Fig. 35).
• Press and hold the Right (Select) button to scroll through
the Alarm values in increments of 100 PSI (6 BAR).
• Press the Left (Advance) button to accept the setting and
advance to Set Dive Time Remaining Alarm, or press and
hold Both buttons for 2 seconds to revert to Surface
Mode.
Fig. 35 - Set End Pressure Alarm
Vista de pagina 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 99 100

Comentarios a estos manuales

Sin comentarios